Table of Contents - Level One
Lesson 1 - Goals of Race Car Technology Level One
Lesson 2 - Why A Race Car Turns
Lesson 3 - Camber
Lesson 4 - Caster
Lesson 5 - Spindle Design
Lesson 6 - Control Arms
Lesson 7 - Anti Pro Drive
Lesson 8 - Steering Systems
Lesson 9 - Bump Steer
Lesson 10 - Ackerman
Lesson 11 - Alignment
Lesson 12 - Sway/Anti Roll Bars
Lesson 13 - Front Geometry and Roll Center/Moment Center
Lesson 14 - Types of Rear Suspension
Lesson 15 - Rear Roll Center
Lesson 16 - Alignment and Toe
Lesson 17 - Rear Steer/Roll Steer/Bump Steer
Lesson 18 - Anti-Squat
Lesson 19 - Driveline Alignment
Lesson 20 - Types of Springs and How to Rate Springs
Lesson 21 - Motion Ratio and Wheel Rate
Lesson 22 - Spring Base Principles and Choosing Spring Rates
Lesson 23 - What They Do and Do Not Do
Lesson 24 - How A Shock Works
Lesson 25 - Different Types of Shocks
Lesson 26 - How to Control A Spring
Lesson 27 - Motion Ratio Affects Shock Rate
Lesson 28 - Tire Temperatures and Tire Pressures
Lesson 29 - Tire Stagger
Lesson 30 - How Racing Brakes Work
Lesson 31 - Summation for Level One
Table of Contents - Level Two
Lesson 1 - Goals of RCT Level Two
Lesson 2 - Weight Placement and Goals
Lesson 3 - Geometry Settings and Considerations
Lesson 4 - Caster Settings
Lesson 5 - Camber Settings
Lesson 6 - Bump Steer
Lesson 7 - Ackerman Settings
Lesson 8 - Alignment - Front to Rear
Lesson 9 - Alignment - Rear with Roll Steer
Lesson 10 - Rear Steer Under Power
Lesson 11 - Toe - Front and Rear
Lesson 12 - Driveline Alignment
Lesson 13 - Spring Selection for Balance
Lesson 14 - Sway/Anti Roll Bars
Lesson 15 - Shock Selection - Matching Spring Rates
Lesson 16 - Bump Setups - Cause and Effect
Lesson 17 - Anti Design - Anti Drive and Anti Squat
Lesson 18 - Ride Heights - Documentations
Lesson 19 - Tire Selection and How to Read
Lesson 20 - Summation of RCT Level Two
Table on Contents - Level Three
Lesson 1 - Goals of RCT Level Three
Lesson 2 - Concept of Balance
Lesson 3 - Forces on the Race Car
Lesson 4 - Roll Angle Analysis and Springs
Lesson 5 - Weight Transfers vs. Static Loading
Lesson 6 - Weight Distribution Front to Rear
Lesson 7 - Dynamic Loading
Lesson 8 - Angle of Attach Analysis
Lesson 9 - Advanced Front Geometry
Lesson 10 - Jacking Force Concept and Uses
Lesson 11 - Rear Steer Concepts and Uses
Lesson 12 - What Makes Traction?
Lesson 13 - Force vs. Weight
Lesson 14 - Where Does Force Come From
Lesson 15 - The Sway Bar Use as a Spring
Lesson 16 - Aero Downforce and Tire Loading
Lesson 17 - Practical Application Part One
Lesson 18 - Practical Application Part Two
Lesson 19 - Advanced Racing Shock Tuning
Lesson 20 - Track Tuning The Setup - Part One
Lesson 21 - Track Tuning The Set - Part Two
Lesson 22 - Post Race Evaluation
Lesson 23 - Summation for RCT Level Three
